UNO TRANS C4 SAE 10 is formulated to meet the specification of C4 Type hydraulic transmission fluid for General Motors Corporation, USA. This is blended with premium quality base stocks with special additives to impart high oxidation stability, anti-wear, anti-rust, anti-foam and desired frictional characteristics while in service. This is also compatible with seal material present in hydraulic transmission systems
UNO TRANS C4 SAE 10 is recommended for all commercial power shift transmissions, industrial torque convertors and automatic transmissions manufactured by Detroit diesel Allison, division of general motors corporation, USA. This is also can be used in a wide variety of off-highway equipment such as dumpers, scrapers, shovel loaders, log loaders, crawler tractors, excavators etc.
Tests | Specification | Typical Value |
---|---|---|
Appearance | Bright & clear | Bright & clear |
Kinematic Viscosity @ 100 deg C | Min : 5.6 | 6.2 |
Viscosity Index (min) | 100 Min | 130 |
Pour Point deg C Max | -30 | -30 |
Sulphated Ash % | 0.97 to 1.2 | 0.98 |
Total Base Number mgKOH/gm | 7.0 to 8.4 | 8.0 |
COC Flashpoint deg C Min | 160 | 185 |
Calcium % wt | 0.2500 – 0.3000 | 0.2682 |
Zinc % wt | 0.0900 – 0.1100 | 0.0912 |
Phosphorus % wt | 0.0800 – 0.1000 | 0.0832 |
These oils are not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.
210L, 50L, 26L