UNO MESH SP 460 is a gear lubricants are blended from premium quality base oils fortified with additives to impart excellent thermal and oxidation stability, good demulsibility, low foaming tendency and provide rust and corrosion protection to metal surfaces.


UNOMESH SP 460 is suitable for use in industrial enclosed gearing where an AGMA extreme pressure lubricant is specified,  bath, splash, circulating, or spray mist lubrication as applicable to the proper viscosity grade,  general industrial plant lubrication where the performance properties of an AGMA extreme pressure lubricant is required.


UNOMESH SP 460 Gear lubricant meet the requirements of  IS 8406 : 1993 (EP Type), AGMA 250.04, DIN 51 517 Part-3 , MAG Cincinnati, Cincinnati Machine P-35 (ISO 460), and U.S. Steel 224 Specification ISO 460


  • High thermal stability EP system helps maintain clean gear and bearing surfaces, minimizing deposits.
  • High oxidation stability limits in-service viscosity increases, which can lead to energy losses.
  • Effective EP system forms a protective film in areas of metal-to-metal contact, minimizing wear rates and maintaining efficient transfer of power.
  • Good water separation and effective rust inhibitors protect surfaces against rust and corrosion.
  • Effective oxidation inhibitors and copper passivator minimize oil oxidation, limiting viscosity increase and promoting long drain intervals.

Typical physical Characteristics

TestsIS 1448UNO MESH SP 460
AppearanceVisualBright & clear fluid
Density @ 29.5°CP – 160.900
Kinematic Viscosity @ 40 deg CP – 25414 – 506
Viscosity Index (min)P – 5690
Copper Corrosion Test @ 100°C for 3 hrsP – 15Not worse than 1
Pour Point deg C MaxP – 100
COC Flashpoint deg C MinP – 69230
Foaming Characteristics/Stability
a) Sequence I
b) Sequence II
c) Sequence III
P – 6710

Health and Safety

These oils are not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.

Available Size:

210L, 50L, 26L